SENSOR 2015

Conference Program

Tuesday, 19 May 2015
10:00-11:45 Opening Ceremony
, Room London

Chairs:
G. Gerlach, Technical University Dresden, Dresden (Germany)
R. Lerch, University Erlangen-Nuremberg, Erlangen (Germany)
R. Werthschützky, Technical University Darmstadt, Darmstadt (Germany)

10:00 - 10:20 Opening address

10:20 - 10:25 Break

10:25 - 11:10  Presentation of the AMA Innovation Award 2015

11:10 - 11:20
Pictures of the Nominates

Tuesday, 19 May 2015

13:30 - 15:00 A1: Force and Torque

Room London, NCC West
Chair A. Schäfer, Hottinger Baldwin Messtechnik GmbH, Darmstadt (Germany)

13:30 A1.1 Build up systems for calibration tasks

T. Kleckers, Hottinger Baldwin Messtechnik GmbH, Darmstadt (Germany)

14:00 A1.2 Processing and evaluation of measured data from build-up systems with special regard to various designs

M. Wagner, Physikalisch-Technische Bundesanstalt (PTB), Braunschweig (Germany)

14:20 A1.3 Measurement and traceability of torque on large drives

G. Beaho, Hottinger Baldwin Messtechnik GmbH, Darmstadt (Germany)

14:40 A1.4 Dynamic Calibration of a Multi-Component Force-/Torque Transducer

J. Schleichert, T. Fröhlich, Ilmenau University of Technology, Ilmenau (Germany)

13:30 - 15:00 B1: Sensor Design and Modelling

Room Amsterdam, NCC West
Chair A. Hauck, SIMetris GmbH, Erlangen (Germany)

13:30 B1.1 Light weight signal processing for a wireless capacitive sensing platform for mobile applications

St. Mühlbacher-Karrer, H. Zangl, Institute of Smart System Technologies, Klagenfurt (Austria)

14:00 B1.2 Identification of temperature-dependent model parameters of ultrasonic piezo-composite transducers

M. Webersen, F. Bause, J. Rautenberg, B. Henning, University of Paderborn, Paderborn (Germany)

14:20 B1.3 Simulation driven development of a novel ultrasonic liquid level sensor

A. Hauck, M. Meiler, SIMetris GmbH, Erlangen (Germany)

14:40 B1.4 Finite element simulation of surface acoustic wave-based sensors

K. Shaposhnikov, M. Kaltenbacher, Vienna University of Technology, Vienna; P. Nicolay, Carinthian Tech Research (CTR AG), Villach (Austria)

13:30 - 15:00 C1: MEMS Applications

Room Venedig, NCC West
Chair J. Vellekoop, University Bremen, IMSAS, Bremen (Germany)

13:30 C1.1 Sensorial surfaces for condition-based maintenance

C. Winkelmann, Winkelmann Mikrosysteme, Bremen (Germany)

14:00 C1.2 Dark field particle tracking with enhanced sizing precision by confining particles

C. Haiden, F. Keplinger; T. Wopelka, M. Jech, Vienna University of Technology, Vienna (Austria); T. Wopelka, M. Jech, AC²T research, Wiener Neustadt (Austria); M. J. Vellekoop, University of Bremen, Bremen (Germany)

14:20 C1.3 Human serum from kidney cancer patients analyzed with a new sensitive Fast Liquid Differential Scanning Calorimetry sensor

R. Splinter, A.W. van Herwaarden, Xensor Integration BV, Delfgauw (The Netherlands); S. Pastorekova, Slovak Academy of Sciences, Bratislava (Slovak Republic)

14:40 C1.4 Characterization of Si Mid-infrared Photonic Components for Chemical and Gas Sensing

U. Hedenig, T. Grille, Infineon Technologies Austria AG, Villach (Austria); G. A. D. Ritchie, J. M. Kirkbride, University of Oxford, Oxford (United Kingdom); V. Lavchiev, B. Jakoby, Johannes Kepler University, Linz (Austria)

13:30 - 15:00 D1: Optical Metrology

Room Zürich, NCC West
Chair P. Lehmann, University Kassel, Kassel (Germany)

13:30 D1.1 Speckle-Insensitive Laser-Doppler Vibrometry with Adaptive Optics and Signal Diversity

C. Rembe, A. Dräbenstedt, Polytec GmbH, Waldbronn (Germany)

14:00 D1.2 Hybrid optical sensor for extreme temperature measurement in next generation higher efficiency greener power plants

N. A. Riza, University College Cork (UCC) Cork (Ireland)

14:20 D1.3 Multi-sensor system for dynamic deformation and vibration measurements at high speed rotors

K. Philipp, R. Kuschmierz, A. Fischer, J. Czarske, Laboratory of Measurement and Testing Techniques, Dresden; A. Langkamp, M. Gude, Institute of Lightweight Engineering and Polymer Technology, Dresden (Germany)

14:40 D1.4 Photovoltaic cells with increased voltage output for optical power supply of sensor electronics

H. Helmers, C. E. Garza, L. Wagner, S. K. Reichmuth, E. Oliva, D. Lackner, S. P. Philipps, A. W. Bett, Fraunhofer Institute for Solar Energy Systems (ISE), Freiburg (Germany)

15:00 - 16:30 Poster Session

Room Level 2, NCC West

P1: Automotive

P1.1 Gasoline sensor based on ZnO

M.S. Aleksanyan, V.M. Arakelyan, V.M. Aroutiounian, A.G. Sayunts, Yerevan State University, Yerevan (Armenia)

P1.2 Kinetic energy harvesting in automotive applications

J. Happel, J. Harmstorf, A. Kneifel, K.-L. Krieger, ITEM Universität Bremen, Bremen (Germany)

P1.3 Inductance of a double-body compression spring as a favorable seat occupancy sensor

F. Wießner, K. Fr. Eichhorn, FTZ Leipzig e.V., Leipzig (Germany)

P1.4 A novel tire sensor system for sensing contact force distribution between tire and driving surface

D. Stapp, M. Dimitrov, D. Ertogrul, P. Kieper, U. Konigorski, Technische Universität Darmstadt, Darmstadt (Germany)

P2: Mechanical

P2.1 Pattern definition of foil based sensors with ultrafast UV lasers

M. Langosch, M. Cerino, A. Landes, D. Vollberg, A.-C. Probst, G. Schultes, Hochschule für Technik und Wirtschaft des Saarlandes, Saarbrücken; D. Göttel, Zentrum für Mechatronik und Automatisierungstechnik gemeinnützige GmbH, Saarbrücken (Germany)

P2.2 Using mechanical spring for monitoring conveyor systems

H. Zur, Mechanische Werkstätten Wurzen GmbH, Bennewitz; Ch. Rückerl, K. Eichhorn, FTZ Leipzig, Leipzig (Germany)

P2.3 Strain gauges made of laser patterned hot stamping foil

J. Hielscher, A. Lyashenko, D. Foik, R. Werthschützky, Technische Universität Darmstadt, Darmstadt (Germany)

P2.4 Investigation on strain gauges made from carbon black based ink

A. Jäger, T. Meiß, R. Werthschützky, Technische Universität Darmstadt, Darmstadt (Germany)

P3: Ultrasound

P3.1 Intelligent ultrasonic flow metering

G. Jedelhauser, acam-messelectronic gmbh, Stutensee-Blankenloch (Germany)

P3.2 Ultrasonic time reversal for haptic interaction

S. Wöckel, H. Arndt, U. Steinmann, J. Auge, Institut für Automation und Kommunikation (ifak) e.V. Magdeburg, Magdeburg (Germany)

P3.3 Detection of ultrasonic plate waves using ceramic strip transducers

L. Claes, F. Bause, J. Rautenberg, B. Henning, University of Paderborn, Paderborn (Germany)

P4: Magnetic Sensors

P4.1 Rotational speed direction detection based on the output duty cycle of a differential hall-effect gear tooth sensor

C. Liu, J.-G. Liu, ChenYang Technologies GmbH & Co. KG, Finsing (Germany); J. Qiu, University of Shanghai for Science and Technology, Shanghai (China)

P4.2 Mapping permanent magnets with high angular accuracy

S. Spasic, M. Blagojevic, N. Markovic, Z. Mitrovic, L. Popovic, R.S. Popovic, SENIS AG, Baar (Switzerland)

P4.3 6D magnetic field distribution measurements of permanent magnets with magnetic field camera scanner

K. Vervaeke, Magcam NV, Researchpark Haasrode, Leuven (Belgium)

P5: Optical Sensors

P5.1 Polymer planar bragg grating sensor for 2D strain sensing

M. Rosenberger, W. Eisenbeil, S. Hessler, S. Belle, R. Hellmann, University of Applied Sciences Aschaffenburg, Aschaffenburg; B. Schmauss, University Erlangen-Nuremberg, Erlangen (Germany)

P5.2 Measurement system to determine the contraction time of the forearm skeletal muscle

S. Guttke, HTWK Leipzig, Leipzig; Ch. Rückerl, Research and Transfer Center at HTWK Leipzig, Leipzig (Germany)

P5.3 Electrical fiber optical temperature sensor for high Voltage applications

M. Richter, R. Weigel, A. Kölpin, T. Bosselman, Siemens AG, Erlangen (Germany)

P5.4 Development of a spectral camera for cartilage monitoring

A. Kuehn, A. Graf, U. Wenzel, S. Princz, R. Miller, H. Mantz, M. Hessling University of Applied Sciences Ulm, Ulm (Germany)

P5.5 Optical bragg gratings in inorganic-organic hybrid polymers for highly sensitive temperature measurements

M.Girschikofsky, S.Belle, R.Hellmann, University of Applied Sciences Aschaffenburg, Aschaffenburg; M.Förthner, L.Frey, Friedrich Alexander University Erlangen-Nuremberg, Erlangen; R.Fader, M.Rommel, Fraunhofer Institute for Integrated Systems and Device T

P6: Medical

P6.1 Reference-less human motion recognition using MEMS-based inertial motion sensors and stochastic signal modelling

M. Kamil, M. Haid, T. Chobtrong, E. Günes, P. Abrante-Perez, N. Berezowski, Hochschule Darmstadt, Darmstadt (Germany)

P7: Spectroscopy

P7.1 New reference material for Imaging XPS (X-ray Photoelectron Spectroscopy) instrument characterization

S. Bütefisch, T. Weimann, I. Busch, H.- U. Danzebrink, T. Dziomba, Physikalisch-Technische Bundesanstalt, Braunschweig; T. Gross, W. Unger, BAM Bundesanstalt für Materialforschung und –prüfung, Berlin (Germany)

P7.2 NIR spectroscopy based method for characterisation of biological tissue

M. Lange, T. Reuter, F. Meuche, fzmb GmbH – Research Centre for Medical Technology and Biotechnology, Bad Langensalza (Germany)

P7.3 AdBlue quality control using impedance spectroscopy

A. Fendri, P. Büschel, A. Abedkafi, O. Kanoun, Technische Universität Chemnitz; A. Buchholz, Seuffer GmbH & Co. KG, Calw (Germany)

P8: Gas

P8.1 Linear gas sensor for methane based on a selectively permeable membrane

M. Bartholmai, S. Ebert, P. P. Neumann, R. Noske, BAM, Berlin; W. Rehak, Optotransmitter-Umweltschutz-Technologie e.V. (OUT e.V.), Berlin; D. Lazik, Helmholtz Centre for Environmental Research – UFZ (Germany)

P8.2 Colorimetric detection of Bi (III) based on pyridine-2,6-dicarboxylic acid modified silver nanoparticles

G. Khayatian, S. Mohammadi, University of Kurdistan, Sanandaj (Iran)

P8.3 Study of MWCNT/SnO2 nanocomposite acetone and toluene vapor sensors

V. M. Aroutiounian, Z. N. Adamyan, A. G. Sayunts, E. A. Khachaturyan, A. Z. Adamyan, Yerevan State University, Yerevan (Armenia)

P8.4 Switching-type lambda sensor manufactured by joining ofsintered zirconia via glass solder paste

F. Schubert, S. Wollenhaupt, J. Kita, G. Hagen, R. Moos, Department of Functional Materials, Bayreuth (Germany)

P8.5 Highly sensitive carbon nanotubes-SnO² nanocomposite sensor for acetone detection

S. Salehi, E. Nikan, A. A. Khodadadi, Y. Mortazavi, University of Tehran, Tehran (Iran)

P8.6 A new mathematical procedure for simultaneous analysis of gases with resistive gas sensors

R. Seifert, H. B. Keller, Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen (Germany)

P8.7 Micro gas sensor by MEMS processes for selective dual gas detection of carbon monoxide and methane

I. Kim, Ajou University, Suwon; K. Nam, R&D Center, Maccon Inc, Bucheon; W.-Y. Choi, Gangneung-Wonju National University, Gangneung, Gangwon; Y.-W. Song, Korea Institute of Science and Technology, Seongbuk-gu, Seoul (South Korea)

P8.8 UTAM ZnO nanostructured thin film CO sensor

A. J. Mohammed, Al-Mustansiriyah University, Baghdad (Iraq); G. Wilde, University of Münster, Münster (Germany)

P9: Electronics

P9.1 Low cost microwave total power radiometer sensor for industrial applications

R. J. Hadi, C. Sandhagen, A. Bangert, University of Kassel, Kassel; B. Jungstand, A. Göller, hf sensor GmbH, Leipzig (Germany)

P9.2 Fast and efficient dual-forecasting algorithm for WSNs

F. Derbel, F. Strakosch, Leipzig University of Applied Sciences, Leibzig (Germany)

P9.3 Sensors with SOI FET primary transducers and frequency output

A. V. Leonov, A. A. Malykh, V. N. Mordkovich, Institute of Microelectronics Technology and High Purity Materials Russian Acad., Chernogolovka, Moscow; M. I. Pavliuk, JSC, Zelenograd, Moscow (Russia)

P10: Applications

P10.1 Humidity sensors made of graphene

H. A. Zakaryan, V.M. Aroutionian, Yerevan State University, Yerevan (Armenia)

P10.2 Single walled carbon nanotubes / phthalocyanine based hybrid material for chemiresistive gas sensing application

A. Kumar Sharma, R. Saini, R.K. Bedi, A. Mahajan, Guru Nanak Dev University, Amritsar (India)

P10.3 Low temperature ethanol sensors using cerium doped tin oxide nanostructures

A. Johari, M.C.Bhatnagar, IIT Delhi, New Delhi (India)

P10.4 Consistency based sensor defect detection

J.-F. Ehlenbröker, U. Mönks, V. Lohweg, Ostwestfalen-Lippe University of Applied Sciences, Lemgo (Germany)

P10.5 Effect of electrical conduction property on electromagnetic flow meter

X.-Z. Zhang, Tsinghua University, Beijing (China)

16:30 - 17:50 A2: Mechanical Sensors

Room London, NCC West
Chair C. Cavalloni, Kistler Instrumente AG, Winterthur (Switzerland)

16:30 A2.1 Ceramic based pressure sensor with highly sensitive thin film

M. Cerino, R. Britz, D. Göttel, ZeMA - Zentrum für Mechatronik und Automatisierungstechnik gemeinnütz. GmbH, Saarbrücken; T. Kuberczyk, A. Landes, M. Langosch, A.-C. Probst, D. Vollberg, G. Schultes, HTW des Saarlandes, Saarbrücken (Germany)

16:50 A2.2 Capacitive sensor mats for pressure detection with high sensitivity

H. Böse, E. Fuß, Fraunhofer-Institut für Silicatforschung ISC, Würzburg (Germany)

17:10 A2.3 Miniaturized silicon strain gauge elements to accurately measure mechanical quantities

T. Frank, A. Cyriax, A. Gruen, M. Kermann, M. Khatri, CiS Forschungsinstitut für Mikrosensorik und Photovoltaik GmbH, Erfurt (Germany)

17:30 A2.4 Accurate determination of viscosity and mass density of fluids using a piezoelectric tuning fork resonant sensor

A. O. Niedermayer, M. Heinisch, B. Jakoby, J. Kepler University, Linz; T. Voglhuber-Brunnmaier, Danube University Krems, Wiener Neustadt (Austria)

16:30 - 17:50 B2: MEMS & NEMS

Room Amsterdam, NCC West
Chair J. Müller, Technical University Hamburg-Harburg, Hamburg (Germany)

16:30 B2.1 Demonstration of detection system based on MEMS suspended cantilever and on-chip optical read-out

M. Zawierta, G. Putrino, M. Martyniuk, A. Keating, K. K. M. B. Dilusha Silva, R. Woodward, L. Faraone, J. Dell, The University of Western Australia, Crawley; M. Myers, CSIRO, Kensington; R. Jeffery, Panorama Synergy Ltd, Sydney (Australia)

16:50 B2.2 Novel waterproof multi-axis-micro-force-and tactile-sensors for tooling machines and MEMS testing

T. Meiss, F. Pabst, C. Minamisava, K. Ohde, EvoSense Research & Development GmbH, Darmstadt; N. Stefanova, R. Werthschützky, Technische Universität Darmstadt, Darmstadt (Germany)

17:10 B2.3 From basic flow property to MEMS multiparameter sensors

R. Beigelbeck, F. Kohl, A. Jachimowicz, Donau-Universität Krems, Wiener Neustadt; B. Jakoby, Johannes-Kepler-Universität Linz, Linz (Austria)

17:30 B2.4 Strömungssensoren mit galvanisch erzeugten Drähten als sensitive Elemente

S. Quednau , Technische Universität Darmstadt, Darmstadt (Germany)

16:30 - 17:50 C2: Applications

Room Venedig, NCC West
Chair A. Schubert, MSA Technologies and Enterprise Services GmbH, Berlin (Germany)

16:30 C2.1 Wireless sensor for temperature and flux measurements in an axial flux machine

A. Bock, J. Funck, A. Giedymin, C. Gühmann, TU Berlin, Berlin (Germany); D. Liu, R. Burke, University of Bath, Bath (United Kingdom)

16:50 C2.2 Design and selection criteria of high temperature accelerometers for aerospace propulsion

H. Ensinger, Sensoren-Beratung-Ensinger, Reilingen (Germany); B. Metz, PCB Piezotronics, Inc., Depew, NY (USA)

17:10 C2.3 Surveillance of drying processes of forage layers in silos

A. Stacheter, D. Becker, Institute of Sensor and Actuator Technology, Coburg (Germany)

17:30 C2.4 Measurement system for circulating stator currents: Towards condition monitoring of large MW-scale synchronous motors

S. Wildermuth, U. Ahrend, R. Disselnkötter, ABB AG, Ladenburg (Germany); P. Rodriguez ABB AB, Västeras (Sweden); P. Rzeszucinski ABB Sp. z o.o., Krakow (Poland); C. T. Pinto ABB India Limited, Mumbai (India)

16:30 - 17:50 D2: Optical Sensors

Room Zürich, NCC West
Chair N. Weber, Fraunhofer-Institut - IIS -, Erlangen (Germany)

16:30 D2.1 Pseudo-data generation software for FBG-optical fiber based shape sensing

H. Pauer, C. Ledermann, W. Tuschmann, H. Wörn, Karlsruhe Institute of Technology – KIT, Karlsruhe (Germany)

16:50 D2.2 Distributed fiber optical sensing inside the foundation slab of a high-rise building

C. Horch, J. Hupfer, F. Schäfer, Institute for High-Speed Dynamics, Freiburg (Germany)

17:10 D2.3 Unambiguous wide-range optical voltage sensor with dual operating wavelengths

X. Gu, S. V. Marchese, K. Bohnert, ABB Switzerland Corporate Research Center, Baden-Dättwil (Switzerland)

17:30 D2.4 Integration of Si-based UV-photodiodes into a 0.35 μm modular CMOS platform

C. Henkel, D. Gäbler, D. Sommer, S. Thiele, X-FAB Semiconductor Foundries AG, Erfurt (Germany); X. Cao, Branch Office Plymouth, Devon (United Kingdom); T. B. Chuan, X-FAB Sarawak Sdn Bhd, Sarawak (Malaysia)

Wednesday, 20 May 2015

08:30 - 10:00 Plenary Talks

Room London, NCC West

08:30 2. Plenary Talk: Integration of piezo-sensors and actuators into light constructional components

W. - G. Drossel, Fraunhofer-Institut - IWU -, Dresden (Germany)

09:15 3. Plenary Talk: Optical nanosensor technology – from basic research to industrial applications

T. Härtling, M. Reitzig, J. Katzmann, C. Schuster, Fraunhofer-Institut - IKTS -, Dresden (Germany)

10:30 - 12:00 A3: Ultrasound I

Room London, NCC West
Chair B. Henning, University Paderborn, Paderborn (Germany)

10:30 A3.1 Measurement of the pure liquid’s sound velocity in a bubbly sample volume

J. Rautenberg, M. Münch, SensAction AG, Coburg (Germany)

11:00 A3.2 Applications of a compact ultrasonic 3D sensor for recognition of shape and orientation of objects

Chr. Walter, H. Schweinzer, Vienna University of Technology, Vienna (Austria)

11:20 A3.3 Waveguide characteristics of elastic pipes filled with multiphase fluids

S. Wöckel, H. Arndt, U. Steinmann, J. Auge, Institut für Automation und Kommunikation (ifak) e. V. Magdeburg, Magdeburg (Germany)

11:40 A3.4 Annular Arrays for novel measurement methods

E. Kühnicke, M. Wolf, S. Kümmritz, M. Lenz, Technische Universität Dresden, Dresden (Germany)

10:30 - 12:00 B3: Magnetoresistive Sensors

Room Amsterdam, NCC West
Chair R. Slatter, Sensitec GmbH, Lahnau (Germany)

10:30 B3.1 Magnetoresistive (MR) Sensors for angle-, path- and current measurement in harsh environments

R. Slatter, Sensitec GmbH, Lahnau (Germany)

11:00 B3.2 Sensors based on tunnel magnetoresistance - New technology, new opportunities

R. Lehndorff, J. Paul, SENSiTEC GmbH, Mainz (Germany)

11:20 B3.3 Modern scale based magneto resistive sensors systems

A. Voss, A. Bartos, TE Connectivity Sensor Solutions Germany, Dortmund (Germany)

11:40 B3.4 Practical tunneling magnetoresistive Z-axis sensors

J. G. Deak, MultiDimension Technology Co., Ltd., Jiangsu Province (China)

10:30 - 12:00 C3: High Temperature Sensors

Room Venedig, NCC West
Chair H. Fritze, Technische Universität Clausthal, Glosar (Germany)

10:30 C3.1 Acoustic and electrical properties of piezoelectric materials for high-temperature sensing applications

W. L. Johnson, National Institute of Standards and Technology, Boulder, CO (USA)

11:00 C3.2 Miniaturized langasite structures for high-temperature sensor applications

M. Schulz, J. Sauerwald, H. Fritze, Clausthal University of Technology, Goslar (Germany)

11:20 C3.3 A 600°C wireless and passive temperature sensor based on Langasite SAW resonators

B. Wall, R. Gruenwald, M. Klein, Vectron International GmbH, Teltow (Germany); G. Bruckner, CTR Carinthian Tech Research AG, Villach/St. Magdalen (Austria)

11:40 C3.4 Precise microacoustic characterization of new piezoelectric crystals for high-temperature sensors

H. Schmidt, A. Sotnikov, S. Biryukov, M. Weihnacht, IFW Dresden, Dresden (Germany)

10:30 - 12:00 D3: Optical Measurement Technology

Room Zürich, NCC West
Chair B. Zagar, Johannes-Kepler-University Linz, Linz (Austria)

10:30 D3.1 Fiber bragg grating measurement

A. Koch, M. Schmid, TU München, Munich (Germany)

11:00 D3.2 Non-destructive imaging and spectroscopy methods using laser light

H. Grün, RECENDT, Linz (Austria)

11:20 D3.3 Real-time detection and measurement of cracks in fatigue test applications

T. Thurner, TU Graz, Graz (Austria)

11:40 D3.4 Multimode laser doppler velocimeter for flow measurements in the manifold of a fuel cell stack

S. Burgmann, M. E. Kinaci, Zentrum für BrennstoffzellenTechnik GmbH (ZBT), Duisburg; L. Büttner, J. Czarske, F. Schmieder, Technische Universität Dresden, Dresden (Germany)

13:30 - 14:50 A4: Ultrasound II

Room London, NCC
Chair J. Rautenberg, University Paderborn Paderborn, (Germany)

13:30 A4.1 Spray-on ferroelectrics for fabrication of custom tailored composite transducers for NDE and SHM

B. Tittmann, K. Sinding, A. Orr, B. Reinhardt, N. Malarich, The Pennsylvania State University, Pennsylvania (USA)

13:50 A4.2 Measurement of frequency dependent radiation patterns of ultrasonic (wedge) transducers

P. Ploß, S. J. Rupitsch, R. Lerch, University Erlangen-Nuremberg, Erlangen (Germany)

14:10 A4.3 Modular phased array US doppler platform for measurements in liquid metals

H. Beyer, R. Nauber, N. Thieme, L. Büttner, J. Czarske, Technische Universität Dresden Dresden (Germany)

14:30 A4.4 Broadband and resonance-free sensing and emitting of airborne ultrasound

M. Daschewski, J. Prager, M. Gaal, M. Weise, Federal Institute for Materials Research and Testing, Berlin (Germany)

13:30 - 14:50 B4: Sensor Materials

Room Amsterdam, NCC West
Chair S. Büttgenbach, Technical University Braunschweig, Braunschweig (Germany)

13:30 B4.1 Wavelength selective metamaterial absorber for thermal detectors

A. Shoshi, T. Maier, H. Brückl, Donau-Universität Krems, Wiener Neustadt (Austria)

13:50 B4.2 Optimization of silica gel beds for the use in humidity controller setups

N. Rogge, T. Fröhlich, Technische Universität Ilmenau, Ilmenau; F. Hilbrunner, Sartorius Weighing Technology GmbH, Göttingen (Germany)

14:10 B4.3 Investigations of the electrical contacting of new piezoresistive polymer-ceramics

L. Tang, F. Roth, T. Rossner, J. Lotichius, J. Hielscher, N. Nicoloso, R. Werthschützky , Technische Universität Darmstadt, Darmstadt (Germany)

14:30 B4.4 Novel gold nanoparticle organic composites: characterization of optical and sensing properties

Y. Daskal, R. Dittrich, Y. Joseph, C. Himcinschi, B. Abendroth, G. Gärtner, J. Walter, TU Bergakademie Freiberg, Freiberg (Germany)

13:30 - 14:50 C4: Medical Sensors

Room Venedig, NCC West
Chair G. Urban, Albert-Ludwigs-University Freiburg, Freiburg (Germany)

13:30 C4.1 A coplanar probe design for humidity spot measurements of human brain tissue

T. Reinecke, S. Ahrens, S. Zimmermann, Leibniz University Hannover, Hannover; L. Hagemeier, M. Klintschar, Hannover Medical School, Hannover (Germany)

13:50 C4.2 NIVA_B – non-invasive determination of blood glucose

H. Fischer, A. Völkel, M. Bussas, TROUT GmbH, Kassel (Germany)

14:10 C4.3 Wireless tear glucose sensor system

A. Hennig, A. Grabmaier, Fraunhofer IMS, Duisburg (Germany); C. Wilson, J. Lauko, NovioSense B. V., AT Nijmegen (The Netherlands)

14:30 C4.4 Ultrasonic dispersion of particles in lab-on-chip systems for enzyme-linked-immunoassays

L. Brandhoff, M. J. Vellekoop, University of Bremen, Bremen (Germany)

13:30 - 14:50 D4: New Technologies

Room Zürich, NCC West
Chair W. Lang, University Bremen, IMSAS, Bremen (Germany)

13:30 D4.1 Inkjet and aerosol Jet® printed sensors on 2D and 3D substrates

B. Polzinger, J. Keck, V. Matic, W. Eberhardt, Hahn-Schickard-Gesellschaft – Institut für Mikroaufbautechnik (HSG-IMAT), Stuttgart; H. Kück, Universität Stuttgart, Stuttgart (Germany)

13:50 D4.2 Investigation of DRIE etching performance on signal quality of a SOI based pressure sensors for harsh environments

P. Mackowiak, F. Meinecke, X. Gao, O. Ehrmann, K.-D. Lang, Technical University Berlin, Berlin; B. Mukhopadhyay, T. Hai Hoang, Q.-C. Dao, Fraunhofer Insitute for Reliability and Microintegration, Berlin; H.-D. Ngo, University of Applied Sciences, Berlin

14:10 D4.3 Silicon probing tips coated with protective aluminum oxide thin films for fast tactile cantilever sensors

H. S. Wasisto, F. Yu, M. Ali Deeb,TU Braunschweig, Braunschweig; L. Doering, U. Brand, Physikalisch-Technische Bundesanstalt, Braunschweig; S. Völlmeke, CiS Forschungsinstitut für Mikrosensorik und Photovoltaik GmbH, Erfurt; A. Bakin, A. Waag, E. Peiner,

14:30 D4.4 Printed sensor for integrating in aluminum during casting

G. Dumstorff, W. Lang, Institute for microsensors, -actuators and –systems, Bremen (Germany)

15:10 - 16:30 A5: Acoustic Sensing

Room London, NCC West
Chair G. Fischerauer, University Bayreuth, Bayreuth (Germany)

15:10 A5.1 Simulation assisted ultrasonic defect characterization in heavy rotor forgings

K. T. Fendt, H. Mooshofer, Siemens AG, Munich; S. J. Rupitsch, H. Ermert, Friedrich-Alexander University Erlangen-Nuremberg, Erlangen (Germany)

15:30 A5.2 Ultrasound transmission system for TDOA localization with unsynchronized beacons

A. Ens, J. Bordoy, J. Wendeberg, C. Schindelhauer, L. M. Reindl, University of Freiburg, Freiburg (Germany)

15:50 A5.3 Laser-acoustic characterization of coatings

F. Singer, Institute of Sensor and Actuator Technology, Coburg (Germany)

16:10 A5.4 Unidirectional acoustic sensor based on the particle velocity gradient

S. Yu, Y. Yang, School of Marine Science and Technology, Northwestern Polytechnical University, Xi’an (China); G. Carrillo Pousa, D. Fernández Comesaña, Microflown Technologies, Arnhem (The Netherlands)

15:10 - 16:30 B5: Packaging

Room Amsterdam, NCC West
Chair . Wilde, Albert-Ludwigs-University Freiburg, IMTEK, Freiburg (Germany)

15:10 B5.1 Flip-chip package for pressure sensors with operation-temperatures up to 500 °C

R. Zeiser, S. Henneck, P. Wagner, S. Ayub, J. Wilde, University of Freiburg – IMTEK, Freiburg (Germany)

15:30 B5.2 ‘nCapsulate’ freeform sensor packaging

O. Maiwald, J. Raben, Sencio BV, Nijmegen (The Netherlands)

15:50 B5.3 The influence of coating on the sensor wiring in medical guide wires

N. Stefanova, T. Opitz, T. Rossner, T. Meiss, R. Werthschützky, Technische Universität Darmstadt, Darmstadt (Germany)

16:10 B5.4 First Investigation of LTCC package for high temperature SAW sensors

J. Bardong, CTR Carinthian Tech Research AG, Villach/St.Magdalen (Austria); G. Radosavljevic, S. Toskov, A. Binder, Technische Universität Wien, Wien (Austria)

15:10 - 16:30 C5: Medical Systems

Room Venedig, NCC West
Chair J. Lillenhof, Westfälische Hochschule, Gelsenkirchen (Germany)

15:10 C5.1 Force sensor for measuring interaction forces of cardiologists during heart catheterizations

T. Opitz, A. Sacakli, N. Stefanova, T. Rossner, T. Meiss, R. Werthschützky, Technische Universität Darmstadt, Darmstadt (Germany)

15:30 C5.2 Implantable EMG measuring system

M. Völker, N. Antonios, H. Zhou, J. Hauer, Fraunhofer-Institut for Integrated Circuits IIS, Erlangen; R. Ruff, K.-P. Hoffmann, Fraunhofer-Institut for Biomedical Engineering IBMT, St. Ingbert (Germany)

15:50 C5.3 Sonographic detection of nanoparticles used for magnetic drug targeting

M. Fink, H. Ermert, M. Löffler, B. Tewes, A. Sutor, A. Koch, Friedrich-Alexander University Erlangen-Nuremberg, Erlangen; S. Lyer, C. Alexiou, University Hospital Erlangen, Erlangen (Germany)

16:10 C5.4 Increasing the reliability of applications in AAL by distinguishing moving persons from pets by means of a sensor floor

R. Hoffmann, A. Steinhage, C. Lauterbach, Future-Shape GmbH, Höhenkirchen-Siegertsbrunn (Germany)

15:10 - 16:30 D5: Chemical & Bio Sensors

Room Zürich, NCC West
Chair S. Zimmermann, Leibniz University Hannover, Hannover (Germany)

15:10 D5.1 Quantification of volatile organic compounds in the ppb-range using partial least squares regression

M. Bastuck, C. Bur, T. Sauerwald, A. Schütze, Saarland University, Saarbrücken (Germany); A. Lloyd Spetz, M. Andersson, Linköping University (Sweden)

15:30 D5.2 Optimized manufacturing of industrial hydrogel sensors

M. Windisch, J. Lienig, TU Dresden, Dresden; K.-J. Eichhorn, R. Schulze, Leibniz Institute of Polymer Research Dresden, Dresden (Germany)

15:50 D5.3 Laser induced fluorescence spectroscopic sensor for real-time identification of fossil diesel fuel, biodiesel and their blends

Z. Fan, V. Gross, J. Krahl, Coburg University of Applied Sciences and Arts, Coburg (Germany)

16:10 D5.4 A CMOS based polysilicon nanowire biosensor for monitoring the cardiovascular disease markers in human serum

I-S. Wang, C.-C. Peng, C.-T. Lin, National Taiwan University, Taipei; J.-K. Lee, National Taiwan University Hospital, H.-H.Tsai, H.-H. Liao, National Applied Research Laboratories, Hsinchu (Taiwan)

15:30 - 17:00 E5: Gas Sensors I

Room Dublin, NCC West
Chair M. Fleischer, Siemens, München (Germany)

15:30 E5.1 Chromosensitive Gasdetektion

K. Schmitt, C. Pannek, J. Wöllenstein, Fraunhofer Institute for Physical Measurement Techniques IPM, Freiburg (Germany)

16:00 E5.2 Artificial inverse opal structures for sensing applications

T. Wagner, Universität Paderborn, Paderborn (Germany)

16:20 E5.3 Photonic Microstructures for Gas Detection in the MIR

A. Popescu, Siemens AG, Munich (Germany)

16:40 E5.4 Semiconductor nanocrystals – versatile building blocks for innovative microsystems

T. Otto, J. Martin, A. Weiß, Fraunhofer Institute for Electronic Nano Systems - ENAS, Chemnitz (Germany)

Thursday, 21 May 2015

08:30 - 10:00 Plenary Talks

Room London, NCC West

08:30 4. Plenary Talk: Smart adaptive photonic sensor systems

J. Czarske, Technical University Dresden, Dresden (Germany)

09:15 5. Plenary Talk: Microwave Sensors: Enabling Technologies for Life Sciences, Environmental and Industrial Process Monitoring?

R. Jakoby, Technical University Darmstadt, Darmstadt (Germany)

10:20 - 11:50 A6: Material Characterization

Room Dublin, NCC West
Chair St. Rupitsch, Friedrich-Alexander University Erlangen-Nuremberg, Erlangen (Germany)

10:20 A6.1 Utilizing guided acoustic waves to measure dispersive material properties of polymers

J. Rautenberg, F. Bause, B. Henning, University of Paderborn, Paderborn (Germany)

10:50 A6.2 Inverse method for determining material parameters of piezoceramics and passive materials

M. Weiß, J. Ilg, St. J. Rupitsch, R. Lerch, Friedrich-Alexander University Erlangen- Nuremberg, Erlangen (Germany)

11:10 A6.3 Testing of thin permanent magnets at higher frequencies

D. Perchtold, M. Kaltenbacher, Vienna University of Technology, Wien (Austria); H. Husstedt, Deutsches Hörgeräte Institut GmbH, Lübeck (Germany)

11:30 A6.4 Characterization of the polarization state of embedded piezoelectric transducers by thermal waves and thermal pulses

A. Eydam, G. Suchaneck, G. Gerlach, Technische Universität Dresden, Dresden (Germany)

10:20 - 11:50 B6: Flow I

Room Amsterdam, NCC West
Chair W. Drahm, Endress+Hauser GmbH+Co. KG, Freising (Germany)

10:20 B6.1 MEMS-based micro-coriolis density and flow measurement technology

C. Huber, M. Schuerch, Endress+Hauser Flowtec AG, Reinach; F. Steinhoff, P. Reith, S. Wirth, H. Feth, A. Rasch, TrueDyne Sensors AG, Reinach (Switzerland)

10:50 B6.2 Multiphase flow metering with nuclear magnetic resonance spectroscopy

A. Bilgic, J. Kunze, KROHNE Messtechnik GmbH, Duisburg (Germany)

11:10 B6.3 Gas density and viscosity measurement using microcantilever sensor

A. Badarlis, A. Kalfas, Aristotle University of Thessaloniki, Thessaloniki (Greece); A. Pfau, Endress+Hauser Flowtec AG, Reinach (Switzerland)

11:30 B6.4 Towards metering of tap water by lorentz force velocimetry: Realization and improvement of non-contact flow measurement method

S. Vasilyan, T. Fröhlich, Technische Universität Ilmenau, Ilmenau (Germany)

10:20 - 11:50 C6: Geometrical Measurements

Room Venedig, NCC West
Chair A. Weckenmann, Friedrich-Alexander University Erlangen-Nuremberg, Erlangen (Germany)

10:20 C6.1 Function-Oriented measurements of micro gears for lifetime evaluation

B. Haefner, G. Lanza, Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany)

10:50 C6.2 Calibration concept for dimensional measurements with optical multiscale multi-sensor systems

A. Loderer, W. Hartmann, T. Hausotte, Friedrich-Alexander University Erlangen- Nuremberg, Erlangen (Germany)

11:10 C6.3 Compact optical sensor for the measurement of surface microtopographies on turbine blades

Y. Li, M. Kästner, E. Reithmeier, Gottfried Wilhelm Leibniz Universität Hannover, Hannover (Germany)

11:30 C6.4 Tactile and non-contact sensors for coordinate measuring technology

R. Christoph, I. Schmidt, Werth Messtechnik GmbH, Gießen (Germany)

10:20 - 11:40 D6: Sensor Electronic

Room Zürich, NCC West
Chair A. König, Technical University Kaiserslautern, Kaiserslautern (Germany)

10:20 D6.1 Universal and dynamically reconfigurable sensor interface in lab-on-spoon multi-sensor system

R. Freier, A. König, Technical University Kaiserslautern, Kaiserslautern (Germany)

10:40 D6.2 An ultra-low power wake-up receiver for real-time constrained wireless sensor networks

F. Derbel, S. Bdiri, HTWK Leipzig, Leipzig (Germany)

11:00 D6.3 Wearable electronics – market & technology analysis

G. Girardin, YOLE Développement Le Quartz, Lyon-Villeurbanne (France)

11:20 D6.4 Handheld readout system for field-effect based biosensors arrays for label-free detection of biomolecules

T. Chien Nguyen, M. Schwartz, J.Blinn, S. Ingebrandt, University of Applied Sciences Kaiserslautern, Zweibrücken; X. T. Vu, RWTH Aachen University, Aachen (Germany)

10:20 - 11:50 E6: Gas Sensors II

Room London, NCC West
Chair St. Zimmermann, Leibniz Universität Hannover, Hannover (Germany)

10:20 E6.1 Electrochemical sensors - at the heart of dräger gas detection systems

P. Tschuncky, Drägerwerk AG & Co. KGaA, Lübeck (Germany)

10:50 E6.2 Correlation of ammonia storage and dielectric properties of SCR catalyst materials by microwave cavity perturbation

M. Dietrich, D. Rauch, R. Moos, University of Bayreuth, Bayreuth; U. Simon, RWTH Aachen University, Aachen (Germany); A. Porch, Cardiff University, Cardiff (United Kingdom)

11:10 E6.3 Miniaturized photoacoustic CO2 sensors for consumer applications

J. Huber, Fraunhofer Institute for Physical Measurement Techniques (IPM), Freiburg; J. Wöllenstein, University of Freiburg, Freiburg; S. Kolb, A. Dehé, F. Jost, Infineon Technologies AG, München (Germany)

11:30 E6.4 Sensitive detection of benzene in the presence of interferents by high kinetic energy ion mobility spectrometry

A. T. Kirk, J. Langejuergen, M. Allers, J. Oermann, S. Zimmermann, , Leibniz University Hannover, Hannover (Germany)

13:00 - 14:20 A7: Impedance Spectroscopy

Room Dublin, NCC West
Chair O. Kanoun, Technical University Chemnitz, Chemnitz (Germany)

13:00 A7.1 Flexible free standing SU-8 microfluific impedance spectroscopy sensor for 3D molded interconnect devices application

M.-P. Schmidt, A. Oseev, A. Brose, Otto von Guericke University Magdeburg, Magdeburg; C. Engel, TEPROSA GmbH, Magdeburg; S. Hirsch, University of Applied Sciences Brandenburg, Brandenburg an der Havel (Germany)

13:20 A7.2 Impedance investigation of milk dilution

A. Abdelkafi, P. Büschel, A. Fendri, O. Kanoun, Technische Universität Chemnitz, Chemnitz (Germany)

13:40 A7.3 Efficient implementation of a multitone – sine – generation method for electrical impedance spectroscopy sensors

A. Renner, TU Kaiserslautern, Kaiserlautern; M. Herz, iC-Haus GmbH, Bodenheim (Germany)

14:00 A7.4 Cell optimization for the IISIC CMOS-chip serving as a front-end for integrated impedance spectroscopy

A. Renner, J. Lappas, A. König, Kaiserslautern, Kaiserslautern (Germany)

13:00 - 14:30 B7: Flow II

Room Amsterdam, NCC West
Chair R. Beigelbeck, Danube University Krems Center for Integrated Sensor Systems (Austria)

13:00 B7.1 Micromachined flow sensors - a review

J. Lötters, Bronkhorst High-Tech B. V., Ruurlo; J. Groenesteijn, D. Alveringh, T. S. J. Lammerink, M. C. Elwenspoek, R. J. Wiegerink, University of Twente, Enschede (The Netherlands)

13:30 B7.2 Development of Flow Sensors Based on Printed Board Design for Air Conditioning Systems

T. Glatzl, S. Cerimovic, H. Steiner, F. Keplinger, T. Sauter, A. Jachimowicz, Technische Universität Wien, Wien (Austria)

13:50 B7.3 Novel method for determination of gas properties and flow speed

C. Hepp, F. Krogmann, Innovative Sensor Technology IST AG, Ebnat-Kappel (Switzerland); G. Urban, Albert-Ludwigs-Universität Freiburg, Freiburg (Germany)

14:10 B7.4 On the conditions for the determination of the thermal properties of flowing gases by using oscillatory thermal excitation

D. Reyes Romero, Innovative Sensor Technology, IST AG, Ebnat-Kappel (Switzerland); G. Urban, Albert-Ludwigs-Universität Freiburg, Freiburg, (Germany)

13:00 - 14:20 C7: Automotive Sensors

Room Venedig, NCC West
Chair K. Pfaller, Audi AG, Ingolstadt (Germany)

13:00 C7.1 Onboard determination of fuel stability in plug-in hybrid diesel cars by dielectric relaxation spectroscopy

M. Eskiner, F. Bär, M. Rossner, University of Applied Sciences and Arts, Coburg; A. Munack, Thünen-Institute of Agricultural Technology (TI), Braunschweig; J. Krahl, Fuels Joint Research Group, Coburg (Germany)

13:20 C7.2 Dual-sensor-package technology supporting ASIL-D in safety-related automotive applications

W. Scheibenzuber, Infineon Technologies AG, Neubiberg; F. Moissl, Infineon Technologies AG, Regensburg (Germany); J. Nimler Elemparo, Infineon Technologies Malaysia Sdn. Bhd., Kulim (Malaysia); O. Borghetti, H. Witschnig, F. Rasbornig Infineon Technolog

13:40 C7.3 Waveform-based state determination for catalytic converters

I. Motroniuk, R. Stöber, G. Fischerauer, Universität Bayreuth, Bayreuth (Germany)

13:00 - 14:20 D7: Energy Harvesting

Room Zürich, NCC West
Chair G. Scholl, University of the Federal Armed Forces Hamburg, Hamburg (Germany)

13:00 D7.1 A hybrid simulation approach for piezoelectric vibration energy harvesting

D. Gedeon, S. T. Meyer, S. J. Rupitsch, R. Lerch, University Erlangen-Nuremberg, Erlangen (Germany)

13:20 D7.2 Autarkic monitoring with bluetooth low energy (BLE)

J.-M. Gruber, Zurich University of Applied Sciences, Winterthur (Switzerland)

13:40 D7.3 Mechanical energy converter study for lotic water sensor applications

T. J. Schröder, Ch. Schöberlein, Ch. Schmidt, T. Keutel, O.Kanoun, Technische Universität Chemnitz, Chemnitz (Germany)

14:00 D7.4 CMOS integrated miniaturized photovoltaic cells for autonomous sensor nodes: simulations and experimental results

A. Goehlich, M. Stühlmeyer, H. Vogt, Fraunhofer Institut für Mikroelektronische Schaltungen und Systeme, Duisburg (Germany)

13:00 - 14:20 E7: Gas Sensors III

Room London, NCC West
Chair A. Schütze, Saarland University, Saarbrücken (Germany)

13:00 E7.1 Fast ion-selective ppb-level gas sensor based on pulsed atmospheric pressure chemical ionization and ion-ionrecombination

A. Heptner, N. Angerstein, S. Zimmermann, Leibniz University Hannover, Hannover (Germany)

13:20 E7.2 Temperature modulated thermoelectric gas sensors

G. Hagen, N. Leupold, S. Wiegärtner, H. Wittmann, R. Moos, University of Bayreuth, Bayreuth (Germany)

13:40 E7.3 Photonic metal oxide gas sensors: from optical excitation to new sensing concepts

T. Wagner, Universität Paderborn, Paderborn; D. Meixner, Universität Gießen, Gießen (Germany)

14:00 E7.4 Real-time composition determination of gas mixtures

J. C. Lötters, E. J. van der Wouden, W. Sparreboom, Bronkhorst High-Tech BV, Ruurlo; J. Groenesteijn, T. S. J. Lammerink, R. J. Wiegerink, University of Twente, Enschede (The Netherlands)

14:50 - 15:50 A8: Strain Sensing

Room Dublin, NCC West
Chair E. Manske, Technical University Ilmenau, Ilmenau (Germany)

14:50 A8.1 Areal optical surface measurement – how to get reliable topography data

H. Schmidt, T. Hausotte, University Erlangen-Nuremberg, Erlangen (Germany)

15:10 A8.2 Technical textiles for monitoring applications in construction

M.-B. Schaller, GGB Gesellschaft für Geomechanik und Baumesstechnik mbH, Espenhain; E. Thiele, Sächsisches Textilforschungsinstitut (STFI) e. V. Chemnitz, Chemnitz (Germany)

15:30 A8.3 Embedded surface-pressure measurement with flexible piezoelectric thin-film sensors

D. Stapp, M. Dimitrov, D. Ertogrul, P. Kieper, U. Konigorski, Technische Universität Darmstadt, Darmstadt (Germany)

14:50 - 16:20 B8: Fluid-Structure Interaction Sensing

Room Amsterdam, NCC West
Chair St. Becker, University Erlangen-Nuremberg, Erlangen (Germany)

14:50 B8.1 Methods and sensor applications to analyze fluid-structure-acoustic problems

S. Becker, S. Müller, University Erlangen-Nuremberg, Erlangen (Germany)

15:20 B8.2 Simultaneous measurements of the liquid phase velocity and gas bubble trajectories in a two-phase flow at gas-evolving electrodes

D. Baczyzmalski, C. J. Kähler, C. Cierpka, Bundeswehr University Munich, Neubiberg; T. Weier, Helmholtz-Zentrum Dresden-Rossendorf, Dresden (Germany)

15:40 B8.3 Using a high speed camera for high resolution3D measurements of sound-flow interaction

J. Gürtler, A. Döring, D. Haufe, J. Czarske, A. Fischer, TU Dresden, Dresden; A. Schulz, TU Berlin, Berlin; F. Bake, L. Enghardt, German Aerospace Center Berlin (Germany)

14:50 - 16:30 C8: Calibration & Testing

Room Venedig, NCC West
Chair K. D. Sommer, Physikalisch-Technische Bundesanstalt, Braunschweig (Germany)

14:50 C8.1 Modelling and control of a pressure and temperature test chamber for pure memspressure sensors

J. Lotichius, E. Christmann, R. Werthschützky , Technische Universität Darmstadt, Darmstadt (Germany)

15:10 C8.2 CT measurements of microparts: Numerical uncertainty determination and structural resolution

M. Fleßner, E. Helmecke, T. Hausotte, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen; A. Staude, BAM Federal Institute for Materials Research and Testing, Berlin (Germany)

15:30 C8.3 Optical tests on submarine and land vehicle periscopes in parallel with environmental tests

M. Honlet, K. Wehrenberg, Airbus DS Optronics GmbH, Oberkochen (Germany)

15:50 C8.4 Partially estimated polynomial MEMS sensor calibration

A. Dickow, G. Feiertag, Munich University of Applied Sciences, Munich (Germany)

16:10 C8.5 Thermal decoupling of heat sources by means of PCM-shielding

M. Schalles, T. Fröhlich, M. Röser, Technische Universität Ilmenau, Ilmenau; J. Flügge, Physikalisch Technische Bundesanstalt, Braunschweig (Germany)

14:50 - 16:10 D8: Signals & Systems

Room Zürich, NCC West
Chair A. König, Technical University Kaiserslautern, Kaiserslautern (Germany)

14:50 D8.1 Detecting and compensating sensor faults in a hydraulic condition monitoring system

N. Helwig, A. Schütze, ZeMA - Centre for Mechatronics and Automation gGmbH, Saarbrücken (Germany)

15:10 D8.2 Multi-parameter low-power sensor network for aquatic research

L. Wahn, H. K. Trieu, J. Müller, TU Hamburg-Harburg, Hamburg; T. Gentz, M. Schlüter, Alfred Wegener Institute for Polar and Marine Research, Bremerhaven (Germany)

15:30 D8.3 Evaluation of laser sensors for precise line follow applications

M. Albert, D. Eck, K. Schilling, Zentrum für Telematik e. V., Gerbrunn (Germany)

14:50 - 16:10 E8: Gas Sensors IV

Room London, NCC West
Chair R. Moos, University of Bayreuth, Bayreuth (Germany)

14:50 E8.1 Colorimetric gas sensors for RFID-Applications

K. Schmitt, C. Pannek, J. Wöllenstein, Fraunhofer Institute for Physical Measurement Techniques, Freiburg (Germany)

15:10 E8.2 Nanostructured WO3 semiconductor gas sensor for selective detection of naphthalene

M. Leidinger, T. Sauerwald, A. Schütze, Saarland University, Saarbrücken (Germany); J. Huotari, J. Lappalainen, University of Oulu, Oulu (Finland)

15:30 E8.3 Tracer gas experiments in subways using an integrated measuring and analysis system for sulphur hexafluoride

M. Brüne, A. Pflitsch, J. Spiegel, Ruhr-University Bochum, Bochum; K. Potje-Kamloth, Fraunhofer ICT-IMM, Mainz; C. Stein, smartGAS Mikrosensorik GmbH, Heilbronn (Germany)

15:50 E8.4 Detecting poisoning of metal oxide gas sensors by temperature cycled operation

M. Schüler, T. Sauerwald, A. Schütze, Saarland University, Saarbrücken (Germany)