SMSI 2025 Conference Program

,

09:45 PT1 - AI powered metrology: from quality metrics to sensor networks

Cornelia Denz, Physikalisch-Technische Bundesanstalt - PTB, Braunschweig (Germany)

10:30 PT2 - MEMS speaker technology and Edge AI: broadband ultrasonic solutions for health and industrial applications

Andrea Rusconi, USound GmbH, Vienna (Austria)

11:30 A1.1 - Development of an Optical Real-Time Measurement System for Air Change Rates in Indoor Environments

R. Grüttner, C. Friebe, Institut für Luft- und Kältetechnik gemeinnützige Gesellschaft mbH, Dresden (Germany)

11:50 A1.2 - Wireless Network Architecture for Comprehensive Indoor Environmental Quality Monitoring in Public Schools

F. Sievers, N. Langer, S. Palzer, TU Dortmund University, Dortmund (Germany)

12:10 A1.3 - Validation of a Sensor Node Prototype for Multimodal Climate Measurement Network

M. Bankwitz, S. Hirsch, Brandenburg University of Applied Sciences, Brandenburg/Havel (Germany), C. Engel, TEPROSA GmbH, Magdeburg (Germany)

12:30 A1.4 - Optimizing OF-CEAS for the Detection of stable methane isotopes in the atmosphere

C. Dinc, P. Nitzsche, J. Goldschmidt, University of Freiburg, Freiburg (Germany), K. Schmitt, J. Wöllenstein, Fraunhofer IPM, Freiburg (Germany)

11:30 B1.1 - Overview: Multimodal Smart Sensor Networks for Plant Monitoring and Improved Energy Efficiency

D. Arendes, C. Fuchs, C. Bur, A. Schütze, Saarland University, Saarbrücken (Germany), J. Kelleter, GTE Industrieelektronik GmbH, Viersen (Germany), T. Baur, 3S Technologies GmbH, Saarbrücken (Germany), W. Simmendinger, Sciosense Germany GmbH, Reutlingen (

11:50 B1.2 - Gas Source State Estimation with Reynolds-Averaged Dispersion Model and Time-Averaged Measurements

A. Raffeiner, R. Pohle, Siemens AG, Munich (Germany), J. Chen, A. J. Lilienthal, Technical University of Munich (Germany)

12:10 B1.3 - Performance Assessment of Methane and Carbon Dioxide Sensors for Drone-Based Environmental Gas Monitoring

M. Stanisavljevic, J. Zirzow, P. P. Neumann, Bundesanstalt für Materialforschung und -prüfung, Berlin (Germany), S. Essel, Infraserv GmbH & Co. Höchst KG, Frankfurt am Main (Germany), N. Karbach, T. Hoffmann, Johannes Gutenberg University Mainz, Mainz (Ge

12:30 B1.4 - Mobile Test Bed for Development and Validation of Networked Multimodal Gas Leakage Detection

C. Fuchs, A. Almohemied, D. Arendes, A.Schütze, Saarland University, Saarbrücken (Germany)

11:30 C1.1 - Comparison of Polyimide to Silicon Nitride Membranes for Robust Thermal Flow Sensors

T. Trautmann, A. Schander, M. Vellekoop, University of Bremen, Bremen (Germany)

11:50 C1.2 - Multichannel electrical conductivity sensor for gas-liquid flow imaging

M. Bliem, S. Puttinger, M. Da Silva, Johannes Kepler University Linz, Linz (Austria)

12:10 C1.3 - Measurability of changes of the laminar-turbulent transition on wind turbines by means of thermographic flow visualization and a co-rotating measurement platform

J. Dieckmann, A. von Freyberg, A. Fischer, University of Bremen, Bremen (Germany), N. Balaresque, Deutsche WindGuard Engineering GmbH, Bremerhaven (Germany)

12:30 C1.4 - Advances in Magnetic Flow Metering: A Clamp-on Device

L. Schmieder, P. Koss, Fraunhofer IPM, Freiburg im Breisgau (Germany)

11:30 D1.1 - eNDIRi² evaluation kit – evaluation system for IR components

L. Naujock, J. Knossalla, A. Isserstedt-Trinke, A. Sachse, S. Biermann, Micro-Hybrid Electronics GmbH, Hermsdorf (Germany)

11:50 D1.2 - Investigation of the suitability of MEMS-FPI-based NIR spectral detectors for the analysis of cooling lubricants

J. Otto, K. L. Krieger, University of Bremen, Bremen (Germany)

12:10 D1.3 - A gonioreflectometer for the measurement of bidirectional reflectance distribution functions in the thermal infrared

H. Noori, K. Ma, R. Schmoll, A. Kroll, University of Kassel, Kassel (Germany)

12:30 D1.4 - Development of a Computationally Efficient Person Detection Procedure for Low-Resolution Infrared Sensor Arrays

A. Rehmer, Heimann Sensor GmbH, Dresden (Germany)

11:30 T1 - Magpylib - Fast Fun and Free Magnetic Field Computation in Python

Florian Slanovic, Silicon Austria Labs GmbH, Villach/St.Magdalen (Austria)

11:30 T2 - Automotive Vision: Environment Perception Systems for Automated Vehicles

Martin Lauer, Karlsruher Institut für Technologie (KIT), Karlsruhe (Germany)

14:00 FO1 - Chips Act, Chips JU, Eureka: Funding opportunities for Sensors? + Workshop on European project funding

Elisabeth Steimetz, VDI/VDE, EPoSS

15:00 JSSS - Journal of Sensors and Sensor Systems

Ulrich Schmid, Technische Universität, Wien (Austria)

15:30 A2.1 - Digital Signal Processing for Eddy Current Parameter Identification in Measurement Applications

S. Hütter, Otto-von-Guericke-Universität Magdeburg, Magdeburg (Germany)

16:00 A2.2 - Wireless Eddy Current Telemetry System for Measuring Axial Piston Ring Movement in a Combustion Engine

A. Higgs, B. Rossegger, M. Engelmayer, LEC GmbH, Graz (Austria), N. Wermuth, Graz University of Technology, Graz (Austria)

16:20 A2.3 - Three-axis Joystick as Stray Field Robust Magnetic Position System

M. Ortner, P. Malagò, F. Slanovc, Silicon Austria Labs, Villach (Austria), S. Leisenheimer, Infineon Technologies AG, Neubiberg (Germany)

16:40 A2.4 - Airgap-Dependent “Pole Eating” Effect in Magnetic Scales

F. Slanovc, D. Markó, M. Ortner, Silicon Austria Labs, Villach (Austria)

15:30 B2.1 - Structural Investigations of Pore Nucleation after Electrochemical Porosification of 4H-SiC for MEMS

G. Pfusterschmied, C. Zellner, D. Schock, U. Schmid, C. Doppler, TU Wien, Vienna (Austria)

16:00 B2.2 - Avoided mode-crossing in MEMS resonators under different dissipation mechanisms

A. Loch Gesing, E. Gietl, M. Stixenberger, D. Platz, U. Schmid, TU Wien, Vienna (Austria)

16:20 B2.3 - Simultaneous Analysis of Local Device Layer Thickness and Film Stress on Cantilevered MEMS Structures

D. Huber, C. Schallert, G. Pfusterschmied, U. Schmid, TU Wien, Vienna (Austria)

16:40 B2.4 - Nanoelectromechanical System Fourier Transform Infrared Spectroscopy (NEMS-FTIR) for Nanoplastic Analysis

J. Timarac-Popovic, A. Giesriegl, H. Besic, S. Schmid, TU Wien, Vienna (Austria), J. Hiesberger, N. Luhmann,J. P. Lafleur, Invisible-Light Labs GmbH, Vienna (Austria)

15:30 C2.1 - Sensor-Intelligence Devices for optimized condition and process monitoring

K. Becker, D. Koster, H.-G. Herrmann, Fraunhofer IZFP, Saarbrücken (Germany)

16:00 C2.2 - Bioreactor Intelligence for Real-Time Monitoring and Automation of Stem Cell Cultivation

D. Amelin, T. Knoll, M. Jochem, S. Altmaier, F. Musiol, F. R. Ihmig, M. M. Gepp, R. Ruff, Fraunhofer IBMT Sulzbach (Germany)

16:20 C2.3 - Real-time, Parallelized and Non-contact Read-Out of 3D Cardiac Tissue Models

R. Le Harzic, F. Stracke, D. Amelin, R. Ruff, F. Musiol, H. Zimmermann, Fraunhofer IBMT Sulzbach (Germany), R. Kettenhofen, D. Bauer, S. Herrmann, J. Neubauer, Fraunhofer Project Center for Stem Cell Process Engineering, Würzburg (Germany)

16:40 C2.4 - Implementation of Sensor-Intelligence Devices (SIDs) for Condition Monitoring Applications in the Sense of Smart Predictive Maintenance

S. Klein, P. Stopp, D. Koster, Fraunhofer IZFP, Saarbrücken (Germany)

15:30 D2.1 - Innovative Sensor Technologies for Agrifood Quality Assessment

F. Venturini, ZHAW Zurich University of Applied Sciences, Winterthur (Switzerland)

16:00 D2.2 - Quality assessment of raw fresh milk from several sources by no-destructive Raman sensor

I. Petrignani, S. Almaviva, A. Lai, ENEA, Italian National Agency for New Technologies, Energy and Sustainable Economic Development, Frascati (Italy)

16:20 D2.3 - Investigating biotic and abiotic stresses on green-leaf plants by means of hand-held Raman spectroscopy

L. Pandolfi, G. Faglia, C. Baratto, CNR-INO,University of Brescia,Brescia (Italy), N. Miotti, M. Turina, M. Ciuffo, E. Gobbi, CNR-IPSP,Turin (Italy), T. Tonto, V. Locato, L. de Gara, Università Campus Bio-Medico di Roma, Rome (Italy)

16:40 D2.4 - Portable Raman Spectroscopy Based Prototype for the Clostridia Detection in Milk

D. Barbiero, F. Melison, L. Cocola, M. Fedel, L. Poletto, National Research Council,Padua (Italy),C. Andrighetto, P. De Dea, Veneto Agricoltura, Thiene (Italy)

15:30 T3 - Essentials of Finite Element Simulations for MEMS

Daniel Platz, Technische Universität Wien, Vienna (Austria)

15:30 T4 - Machine Learning for Industrial Measurement - how to?

Andreas Schütze, Universität des Saarlandes, Saarbrücken (Germany)