| SMSI 2021 |
D9.1 DMP41 - a High-precision Amplifier Based on an Inductive-Voltage-Civider, Suitable to Safeguard Traceability for Most Mechanical Quantities |
A. Schäfer - Hottinger Brüel & Kjaer GmbH, Darmstadt (Germany) |
| SMSI 2021 |
D9.2 Analysis of the Oscillating Behavior of a Highway Bridge for Structural Health Monitoring |
R. Peter, A. Fischerauer, S. Kraus, N. Krug, T. Ringelmann, J. Welsch, G. Fischerauer - Universität Bayreuth, Bayreuth (Germany) |
| SMSI 2021 |
D9.3 Scalable and Automatic Dynamic Excitation of Non-Linear Structures |
P. Blaschke, D. Alarcón - Technische Hochschule Wildau, Wildau (Germany) |
| SMSI 2021 |
D9.4 Detection of Initial Subsurface Defects in Rotor Blade Leading Edges of Wind Turbines by Means of Active Thermography |
F. Jensen, M. Sorg, A. Fischer - University of Bremen, Bremen (Germany) |
| SMSI 2021 |
C7.1 Current Measurement System for Solder Joint Quality Analysis in Photovoltaic Modules |
M. Lenzhofer, L. Neumaier, P. Malago, J. Kosel, M. Ortner - Silicon Austria Labs SAL GmbH, Villach (Austria) |
| SMSI 2021 |
C7.2 Testing of High-Power Traction Batteries |
J. Büdel, J. Teigelkötter, A. Stock, K. Kuhlmann - Technische Hochschule Aschaffenburg, Aschaffenburg (Germany), K. Lang, P. Ott - Hottinger Brüel & Kjaer GmbH, Darmstadt (Germany) |
| SMSI 2021 |
C7.3 Quantitative Evaluation of Artefact Reduction by an Optimized Specimen Orientation for Metrology Based on Industrial Computed Tomography |
M. Kaufmann, I. Effenberger - Fraunhofer Institute IPA, Stuttgart (Germany) |
| SMSI 2021 |
C7.4 Application of Laser Line Scanners for Quality Control during Selective Laser Melting (SLM) |
K. Wehnert, S. Schäfer, J. Schmitt, A. Schiffler - University of Applied Sciences Würzburg-Schweinfurt, Schweinfurt (Germany) |
| SMSI 2021 |
C8.1 Methodology for Diagnosing Sensor Faults on Engine Test Benches |
M. Wohlthan, G. Pirker - LEC GmbH, Graz (Austria), A. Wimmer - Graz University of Technology, Graz (Austria) |
| SMSI 2021 |
C8.2 Near Process Coolant Flow Field Measurements in a Grinding Machine |
C. Vanselow, B. Espenhahn, D. Stöbener, A. Fischer - University of Bremen, Bremen (Germany), L. Schumski, D. Meyer - Leibniz-Institut für Werkstofforientierte Technologien, Bremen (Germany) |