Available documents

Event Title Author(s)
SMSI 2023 P16 - Material Characterization by Ignition Spark Excited Lamb Waves J. Lützelberger, A. Backer, K. Drese, S. Krempel - Coburg University of Applied Sciences and Arts, Coburg (Germany)
SMSI 2023 P17 - Setting up a pressure sensor with flush membrane and without oil filling T. Frank, S. Hermann, A. Grün, D. Hanig, M. Kermann - CiS Forschungsinstitut für Mikrosensorik, Erfurt (Germany)
SMSI 2023 P18 - Multi-pass Laser Raman Spectroscopy for Combustion Diagnostic R. Dal Moro, L. Cocola, F. Melison, L. Poletto - CNR, Padova (Italy)
SMSI 2023 P19 - Investigation of the Shape Deviation for Gas Pores Meas-Ured with X-Ray Computed Tomography B. Baumgärtner, T. Hausotte - Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen (Germany)
SMSI 2023 P20 - A Method for In-Field Calibration for Periodical Technical Inspections Particle Counter Devices H. Krasa, A. Bergmann, M. Kupper, M. Schriefl - Graz University of Technology, Graz (Austria)
SMSI 2023 P21 - Contactless Torque Measurement in BTA/STS Deep Hole Drilling by using the Villari Effect – a first Proof of Concept A. Schwersenz, R. Erli, K. Nawal - Magnetic Sense GmbH, Öhringen (Germany), D. Biermann, S. Michel, R. Schmidt, L. Wiesweg - Technical University of Dortmund, Dortmund (Germany)
SMSI 2023 P22 - Validation of an Inside Sensor System for Deformation Measurements on Bionic Lightweight Gears M. Terlau, M. Pillarz, A. von Freyberg, A. Fischer - University of Bremen, Bremen Institute for Metrology, Automation and Quality Science (BIMAQ), Bremen (Germany)
SMSI 2023 P23 - Special Requirements of the Design of new Transfer Artefacts for the Calibration of Mass Standards K. Lehrmann - Physikalisch-Technische-Bundesanstalt, Braunschweig (Germany)
SMSI 2023 P24 - In-Situ Monitoring for Fused Filament Fabrication by means of Multi-Electrode Resistance Measurements A. Dijkshoorn, H. Jonkers, G. Krijnen, P. Neuvel, S. Stramigioli - University of Twente, Enschede (Netherlands)
SMSI 2023 P25 - Resistive Sensor for Online Assessment of the Insulation Condition of High Voltage Capacitive Bushings M. Haas Rambo, D. Benetti, A. de Melo - COPEL Geracao e Transmissao S.A., Curitiba (Brazil), I. Chueiri, V. Costa Zambenedetti, E. Jamhour - Pontificia Universidade Catolica do Parana, Curitiba (Brazil)