| SMSI 2020 |
P3.6 Indirect geometry measurement method for in situ application in laser chemical machining |
M. Mikulewitsch, D. Stöbener, A. Fischer - University of Bremen, Bremen (Germany) |
| SMSI 2020 |
P3.7 Experimental set-up for sensors evaluation in a controlled environment |
A. Bescond, F. Gaie-Levrel, L. Bregonzio-Rozier, T. Macé - Laboratoire National de Métrologie et des Essais, Paris Cedex (France) |
| SMSI 2020 |
P3.8 Form and Mid-Spatial-Frequency Measurement of Unknown Freeform Surfaces |
T. Binkele, D. Hilbig, M. Essameldin, T. Henning, F. Fleischmann - University of Applied Sciences Bremen, Bremen (Germany) |
| SMSI 2020 |
P3.9 FEM Model of a Tactile Sensor Based on Inductance Measurements and Magnetosensitive Elastomer |
S. Gast, K. Zimmermann - University of Technology, Ilmenau (Germany) |
| SMSI 2020 |
P3.10 Photonic Measurement System for Load Detection in a Neuro Interventional Training Model |
S. Shojaei Khatouni, L. Rennpferdt, H. Trieu - Hamburg University of Technology, Hamburg (Germany) |
| SMSI 2020 |
P3.11 Plastic Material Classification using Neural Network based Audio Signal Analysis |
S. Grollmisch - University of Technology, Ilmenau (Germany), D. Johnson, T. Krüger, J. Liebetrau - Fraunhofer Institute IDMT, Ilmenau (Germany) |
| SMSI 2020 |
P4.1 Measurement Uncertainty Assessment for Virtual Assembly |
M. Kaufmann, I. Effenberger, M. Huber - Fraunhofer Institute for Manufacturing Engineering and Automation IPA, Stuttgart (Germany) |
| SMSI 2020 |
P4.2 Signal-to-Noise-Ratio Optimized Design of Rotating-Coil Magnetometers |
P. Rogacki, L. Fiscarelli, S. Russenschuck - CERN, Meyrin (Switzerland), K. Hameyer - RWTH Aachen University, Aachen (Germany) |
| SMSI 2020 |
P4.3 - 6 DoF Pose Estimation with ìm/ìrad Accuracy Based on Laser Multilateration |
J. Nitsche, M. Franke, D. Heißelmann - Physikalisch-Technische Bundesanstalt, Braunschweig (Germany), N. Haverkamp - Carl Zeiss Industrielle Messtechnik, Oberkochen (Germany) |
| SMSI 2020 |
P4.4 Estimate the error of offset issue and amplitude mismatch of Atan2 function |
J. Zhou, M. Dietrich, P. Walden - Schaeffler Automotive Buehl GmbH & Co. KG, Bühl (Germany), J. Kolb - Schaeffler Technologies AG & Co. KG, Karlsruhe (Germany), M. Doppelbauer - Karlsruhe Institute of Technology, Karlsruhe (Germany) |
