| SMSI 2021 |
D8.2 Influence of Continuous Scan Mode and Workpiece Positioning on Dimensional Measurements with Computed Tomography |
C. Orgeldinger, F. Wohlgemuth, T. Hausotte - Friedrich-Alexander-University Erlangen-Nürnberg, Erlangen (Germany) |
| SMSI 2021 |
D8.3 Accuracy Improvement of the Alternating Current Zero Potential Method for Impedimetric Sensor Matrices |
Z. Hu, D. Chen, O. Kanoun - Technische Universität Chemnitz, Chemnitz (Germany) |
| SMSI 2021 |
D8.4 Precision Measurement of the Application-dependent Current Consumption of a Wireless Transceiver Chip |
T. Doebbert, C. Cammin, G. Scholl - Helmut-Schmidt-University, Hamburg (Germany) |
| SMSI 2021 |
D9.1 DMP41 - a High-precision Amplifier Based on an Inductive-Voltage-Civider, Suitable to Safeguard Traceability for Most Mechanical Quantities |
A. Schäfer - Hottinger Brüel & Kjaer GmbH, Darmstadt (Germany) |
| SMSI 2021 |
D9.2 Analysis of the Oscillating Behavior of a Highway Bridge for Structural Health Monitoring |
R. Peter, A. Fischerauer, S. Kraus, N. Krug, T. Ringelmann, J. Welsch, G. Fischerauer - Universität Bayreuth, Bayreuth (Germany) |
| SMSI 2021 |
D9.3 Scalable and Automatic Dynamic Excitation of Non-Linear Structures |
P. Blaschke, D. Alarcón - Technische Hochschule Wildau, Wildau (Germany) |
| SMSI 2021 |
D9.4 Detection of Initial Subsurface Defects in Rotor Blade Leading Edges of Wind Turbines by Means of Active Thermography |
F. Jensen, M. Sorg, A. Fischer - University of Bremen, Bremen (Germany) |