| 2025 ICU PADERBORN - 9th International Congress on Ultrasonics |
C6-a3 - Monitoring the curing process of adhesive bonds using selective excitation of guided ultrasonic waves |
H. Zeipert, T. Nellius, N. Schönlau, M. Wippermann, L. Claes, B. Henning - Paderborn Universtity, Paderborn (Germany), M. Nicolai, J. Prager - Federal Institute for Material Research and Testing, Berlin (Germany) |
| 2025 ICU PADERBORN - 9th International Congress on Ultrasonics |
C6-b3 - A Holo-array for Enhancement of Ultrasonic Focusing |
Y. Lang, Z. Yang, X. Chen - Xi’an Jiaotong University, Xian (China), Z. Su - The Hong Kong Polytechnic University, Hong Kong (China) |
| 2025 ICU PADERBORN - 9th International Congress on Ultrasonics |
C9-a3 - Experimental study of Baker Coded Ultrasonic Signal for Coarse-Grained Material Testing |
M. Yang, K. Wang, Y. Zhou, W. Wang - Institute of Acoustics, Beijing (China) |
| 2025 ICU PADERBORN - 9th International Congress on Ultrasonics |
C9-a4 - Exploring the Potential of Plasma Micro-Hollow Cathode Transducers for Air-Coupled Ultrasonic Non-Destructive Testing |
D. Solodov, N. Nazari, M. Gaal - Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin (Germany), H. Kersten - Christian-Albrechts-Universität zu Kiel, Kiel (Germany) |
| 2025 ICU PADERBORN - 9th International Congress on Ultrasonics |
C9-a5 - Optimization of Low-Frequency Shear Wave Transducers for Guided Wave Applications |
M. M. Narayanan, M. Nicolai, J. Prager - Federal Institute for Material Research and Testing (BAM), Berlin (Germany) |
| 2025 ICU PADERBORN - 9th International Congress on Ultrasonics |
C13-a2 - Ultrasonic Characterization of Microstructural Inhomogeneity in Additively Manufactured Metals |
J. Tai, Z. Fan - Nanyang Technological University, Singapore (Singapore) |
| 2025 ICU PADERBORN - 9th International Congress on Ultrasonics |
C13-a4 - Virtual source multi-mode method for ultra-thick weld full-section inspection |
X. Ma, M. Chen, K. Yang, H. Jin - Zhejiang University, Hangzhou (China) |
| 2025 ICU PADERBORN - 9th International Congress on Ultrasonics |
C13-b3 - Assessment of the influence of curing parameters on fibre reinforced epoxy composite properties using guided ultrasonic waves |
H. Irmak, S. Wu, T. Marten, T. Tröster, L. Claes - Paderborn University, Paderborn (Germany) |
| 2025 ICU PADERBORN - 9th International Congress on Ultrasonics |
C13-b4 - Ultrasonic metrology for the study of hydrogen embrittlement in steels |
L. Leffray, G. Feuillard, J. Toupin, H. Achdjian, J. Bustillo - INSA Centre Val de Loire, Blois (France), N. Mary - INSA Lyon, Lyon (France) |
| 2025 ICU PADERBORN - 9th International Congress on Ultrasonics |
C13-c1 - Inversion of the corrugation parameters of a double corrugated liquid/solid interface from the diffraction of homogeneous plane waves with the Ultrasonic Polar Scan |
E. Aleksiewicz-Drab, K. Van Den Abeele - KU Leuven, Kortrijk (Belgium), M. Kersemans - Ghent University, Ghent (Belgium) |
