| SMSI 2021 |
A2.1 Mechanisms of Anelastic Loss in Langasite at Temperatures from 113 K to 1324 K |
W. Johnson - National Institute of Standards and Technology, Boulder (USA), Y. Suhak, H. Fritze - Clausthal University of Technology, Goslar (Germany) |
| SMSI 2021 |
A2.2 Housed Temperature Sensors Based on Piezoelectric Resonators for High-Temperature Applications |
M. Schulz, H. Fritze - Clausthal University of Technology, Goslar (Germany), F. Kohler, J. Wilde - University of Freiburg, Freiburg (Germany) |
| SMSI 2021 |
A3.1 Adjustment Concept for Compensating Stiffness and Tilt Sensitivity of a Novel Monolithic EMFC Weighing Cell |
M. Pabst, T. Fröhlich, M. Darnieder, R. Theska - Technische Universität Ilmenau, Ilmenau (Germany) |
| SMSI 2021 |
A3.2 Model Based Evaluation of Integrated DLC Based Sensor System for Load Measurement on Linear Guides |
D. Krampert, S. Unsleber - Bosch Rexroth AG, Schweinfurt (Germany), L. Reindl - Albert-Ludwigs-University Freiburg, Freiburg (Germany) |
| SMSI 2021 |
A3.3 Development of a Traceable Cantilever Calibration Device |
O. Dannberg, T. Fröhlich - Technische Universität Ilmenau, Ilmenau (Germany), M. Kühnel - SIOS Meßtechnik GmbH, Ilmenau (Germany) |
| SMSI 2021 |
A3.4 A Control Concept of a Compensation Load Cell in Terms of Calibration a Cantilever |
V. Cherkasova, O. Dannberg, T. Fröhlich - Technische Universität Ilmenau, Ilmenau (Germany) |
| SMSI 2021 |
A4.1 A Metrological Atomic Force Microscope for Large Range Measurements with Sub-nanometre Resolution |
Y. Wu, E. Wirthmann, U. Klöpzig, T. Hausotte - Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen (Germany) |
| SMSI 2021 |
A4.2 Development of a Non-invasive Pressure Sensor |
P. Szász, V. Migunov - ABB Corporate Research Center, Ladenburg (Germany) |
| SMSI 2021 |
A4.4 Theoretical Analysis of Measurement Flexures at the 5 MN m Torque Standard Machine at PTB |
K. Geva, H. Kahmann, C. Schlegel, R. Kumme - Physikalisch-Technische Bundesanstalt, Braunschweig (Germany) |
| SMSI 2021 |
A5.1 Design, Simulation, Fabrication and Characterization of Piezoelectric MEMS Cantilever for Gas Density and Viscosity Sensors Applications |
A. Mehdaoui, C. Huber, J. Becker, F. Schraner - TrueDyne Sensors AG, Reinach (Switzerland), L. Villanueva - Ecole Polytechnique Fédérale de Lausanne, Lausanne (Switzerland) |
